Learn how to identify the disastrous problems with furnaces or you’ll be left out cold. Furnaces tend to fail at the most inconvenient time. Know the indications of furnace trouble so you can call for assistance right away. A skilled HVAC service provider or a trusted business can help you out before your furnace gets broken.
Here are the signs that you should watch out for whenever the cold season is approaching. By addressing problems with your furnace beforehand, the winter will be more bearable for you and your family. Everyone needs a working HVAC system at home so never compromise.
1. Is the furnace running continuously?
If the furnace is running almost constantly, high are the chances that there’s an issue with its system or its thermostat. If there’s nothing wrong with it, then the problem could be the poor insulation in your home. A professional should also inspect and repair furnaces that cycle too often after operating for only several minutes.
Make sure that the air filters are not clogged, as they may result in poor heating performance. You should also ensure that the room vents are open, as closing all of them may affect the furnace’s normal operation.
2. Is there adequate heat?
Test your furnace early, preferably before the colder weather sets in and when heating becomes a necessity. If no heat is produced by the furnace, make sure that all circuit breakers and switches are working before calling for a service provider.
If the furnace is powered on but you don’t get any heat, then it’s likely to be faulty. Request for a repair service from a specialist employed by a qualified HVAC company. That’s the best way you can assure yourself of a quality furnace repair service.
3. Is the furnace producing a funny odor?
It’s normal for furnaces to smell musty or dusty, especially when starting it up. However, if that smell continues, then it’s best to replace the air filters. If what you smell is similar to burning, then shut off the furnace immediately and call a service technician. If it’s gas that you smell, leave the premises as soon as possible and call the fire department.
4. Did the CO detector go off?
Homes with gas appliances have a CO detector installed for safety and security. Carbon monoxide is a type of gas that’s odorless, colorless, and tasteless. It is a byproduct of the combustion of gas and it’s lethal.
If upon turning on the furnace the CO detector alarm goes off, turn off all the gas appliances and open all doors and windows to let fresh air in and to allow gas to exit the house. Call an HVAC company to check the gas appliances installed in your home, particularly the furnace. Also, make sure that the vents are working efficiently.
If you suspect that your furnace is faulty, don’t hesitate to call the Furnace Repair Keego Harbor MI experts. These people will not just make sure that your furnace works efficiently again, but they’ll also assure the safety of your entire family.